gamma/ XL Solenoid Diaphragm Metering Pump
0.08 gpd to 20.74 gph (12.6 ml/h to 78.5 l/h) at pressures up to 363 psi
The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.
Product description
Overview
Overview
Automatic Degassing for Critical Applications!
The new gamma/ XL is a solenoid metering pump with predictive intelligence. Thanks to its controlled solenoid drive with sensor-free pressure measurement, it detects hydraulic faults even in the case of minimal deviations – immediately and optimally matching its output to the pressure conditions and properties of the medium while protecting the pump and piping systems from overload situations. The gamma/ XL covers a capacity range of .08 GPD at 362 PSIG to 20.74 GPH at 29 PSIG (depending on pump version).
gamma/ XL is the enhancement to our proven gamma/ X. The gamma/ XL also offers additional interfaces, such as CAN bus, making the gamma/ XL connectable to all systems, devices, and platforms. Like the gamma/ X, the gamma/ XL has an intuitive operating concept. The pump is adjusted using a click wheel and 4 additional operating keys. Hydraulic error statuses, such as “Gas in the dosing head”, “Overpressure” and “No pressure” can be detected.
Your benefits
- Electronic stroke length adjustment via click wheel
- Integrated system pressure measurement
- High visibility of LED-indicator lights
- Large, illuminated display
- Integrated pressure measurement and display
- Available diaphragm rupture indicator
- New configurable input/output
- gamma/ XL and delta footprints are identical
Video
Video
Application
Application
Field of application
The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.
- Chemical Vendors
- Food and beverage industry
- Water and Wastewater treatment
- Cooling tower and Boilers
- Electroplating
- All industrial applications, either as a stand-alone unit or integrated in a complete system
Technical Data
Technical Data
Technical Details
- NSF/ANSI 61 Approved Liquid Ends
- Volume adjustment in GPH or LPH
- Manual, Analog, Contact and Batch modes optional
- BUS interfaces such as Profibus, CANbus, PROFINET and Modbus
- Analog output for stroke length and stroke rate transmission
- Auto compensates programmed feed rates during back pressure fluctuations
- As low as 1 mL/hr continuous feed rate with regulated solenoid drive
- Turn down ratio up to 40,000:1
- Integrated 7-day timer
- Detects Overpressure/ No Pressure (broken discharge line) and gas in the liquid end
- Automatically sets optimal speed and stroke based on GPH settings (when set to automatic)
