Concept b Solenoid Diaphragm Metering Pump
0.18 to 4.33 gph (0.7 to 16.4 l/h) at pressures up to 232 psi
Its compact construction and features make it ideal for use in flow proportional or on/off control applications.
Product description
Overview
Overview
Economical metering pump solutions!
The Concept b mounts easily onto a tank or wall bracket. Adjustment of the pump capacity is via the stroke length in the range of 10-100 % or can be set at 1 of the 4 stroke frequency settings. This gives an adjustment ratio of 40:1.
Your benefits
- NSF 61/50 approved
- Low cost opens up opportunities in the most basic applications
- PVDF wetted ends eliminate compatibility concerns
- Integral bleed valve prevents “loss of prime”
- Lowest maintenance costs in its class
- External control via dry contact pulse (1:1)
- Wetted end materials: PP, Acrylic/PVC or PVDF
Application
Application
Field of application
The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.
- Swimming pools
- Spas, fountains and spray pads
- Cooling towers
- Boiler feed applications
- General Chlorination
- Municipal and industrial wastewater
- Water disinfection
- Biocide feed
- “Pump on a drum” applications
Technical Data
Technical Data
Technical Details
- NSF/ANSI 61 Approved Liquid Ends
- Volume adjustment in GPH or LPH
- Manual, Analog, Contact and Batch modes optional
- BUS interfaces such as Profibus, CANbus, PROFINET and Modbus
- Analog output for stroke length and stroke rate transmission
- Auto compensates programmed feed rates during back pressure fluctuations
- As low as 1 mL/hr continuous feed rate with regulated solenoid drive
- Turn down ratio up to 40,000:1
- Integrated 7-day timer
- Detects Overpressure/ No Pressure (broken discharge line) and gas in the liquid end
- Automatically sets optimal speed and stroke based on GPH settings (when set to automatic)
