DCM 5 Series Controller
The PPS DCM 5 Series controller is the perfect partner for remote monitoring and controlling water parameters and processes.
Product description
Overview
Overview
An Ultimate Water Chemistry Solution for Aquatics Applications
The ProMinent DCM 5 Series controller is the perfect partner for remote monitoring and controlling water parameters and processes. The DCM 5 Series precision, flexibility and uncompromising quality represent a world-class IIoT solution to ensure a safe and healthy water experience for your customers and peace of mind for you.
Your benefits
Stay Connected
- Receive email and text alarms
- Make changes from your smartphone, tablet or computer
- No apps required to connect and control
- Automatic emailing of data logs
- WiFi, RS485, Modbus, BACnet and 4G capable
Stay in Control
- Monitor and control
1. Combined chlorine
2. UV systems
3. VFDs - Precision chemical feed
1. Proportional and PID control strategies
2. Control output of ProMinent pumps
Stay Safe
- Configurable digital interlocking to flowmeter and circ pump
- 29 discrete assignable passwords at three access tiers
- Simultaneous monitoring and control of ORP and PPM
World-Class Accuracy
- pH sensor accurate to 0.04 SU per NSF
- PPM sensor compliant to USEPA 334.0
Application
Application
Field of application
The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.
- Therapy pools
- Hot tubs
- Water parks
- Splash pads
- Amusement Park Attractions
Technical Data
Technical Data
| Operator Interface | |
| Remote | Fully interactive Ethernet TCP/IP graphical interface with security access codes |
| Local | 4 line – 20 character OLED display, 12 buttons, multicolor status LED: Steady BLUE = “OK”, Flashing RED = “ALARM”, Steady RED = (Stopped), Multicoloroutput LEDs indicate relay output status as feeding/ off/ alarmed/ or stopped. Ethernet and WiFi status LEDs |
| Sensors | |
| Included Sensors | pH, ORP, Temperature |
| Optional Sensors | Free chlorine, total chlorine, calculated combined chlorine, salt generated free chlorine, stabilized chlorine, conductivity, bromine, feed verification, corrosion,flow rate, water level, UV Intensity, calculated LSI/Ryznar water totalizer |
| Field Upgrades | Sensor input modules are available for field upgrades |
| Inputs | |
| Digital Inputs | 8, (7 fully configurable) |
| Analog Inputs | 7 standard (configurable options) + 4 Optional (additional Temp, 4-20 mA and 2 Corrosion) Examples: 1 Cond, 1 Temp, 1 pH, 1 ORP, 1 FAC, 1 TRC, 1 4-20 mA and 2 Corrosion |
| Outputs | |
| Control Relays | 5 (fully assignable) |
| 1. Acid | |
| 2. Oxidant | |
| 3. Chlorine boost / Caustic feed | |
| 4. Probe Wash / Alarm | |
| 5. Filter Aid / Flow switch test & verify | |
| 6. Auto fill | |
| 7. Heater control | |
| 8. UV control | |
| (Interlocked with sample and recirc flow when used for chemical feed) | |
| Digital Outputs | 4 (fully assignable as dry contact sets or variable frequency pump) |
| 1. UV | |
| 2. Pump / VFD control | |
| 3. Chlorine / Ozone generator | |
| 4. Alarm/ Eco! mode for recirc pump | |
| Base feed available if sensor disconnected | |
| Analog Outputs | 2 (optional isolated, 4-20 mA) |
| Control | On/Off |
| ORP assisting residual | |
| P/PI/PID | |
| Eco! Mode | |
| Event timers | |
| Uv boost / VFD control | |
| Chlorine boost / Ozone control | |
| Flow restored delay (adjustable) | |
| Emergency “Off” for recirculation pump | |
| Autofill | |
| Chem feed verfication (optional) | |
| Pulsed pump speed | |
| Communication | HTML server on board (standard) |
| 10 base T, TCP/IP Ethernet, Optional wireless 3G cellular, Smartphone / iPad | |
| HTML, micro web server with DHCP or user definable IP address | |
| Security | Local and remote access protected by access codes |
| System | |
| Power | 120 or 230 VAC, 60/50 Hz, 5 A/3 A, single phase only |
| Fusing | 5 A at 120 VAC or 2.5 A at 230 VAC |
| Surge Suppresion | Relay 2-5 N.O. contacts snubbed at 0.1 µF, 150 Ω |
| Accessory Power | 15-22 VDC, Unregulated, Thermally fused at 50 mA |
| Enclosure | Non-metallic, NEMA 4X, 7.5″x11.3″ x 5.5″ (WxHxD) |
| Convenience | NSF/ANSI/CAN Standard 50 UL 61010-1 CSA CAN/CSA-22.2 No. 61010-1-12 |
| Warranty | 5 years on electronics |
| 2 years on ORP, pH sensors | |
| 1 year on all other parts |
